R10DEV.NET HABER SİTESİ AÇILDI!R10DEV.NET HABER SİTESİ AÇILDI!

Yardım vSRO Can't start the client

Yardım vSRO Can't start the client
Yardım

Gabbar

ÜYE
Katılım
26 May 2026
Mesajlar
5
Tepkime puanı
1
Puanları
2
Yaş
28
Konum
Egypt
Hi, I was following a guide on how to install vSRO files and I followed every step, but when I opened the client and press start, not happening.



Also, I'm not sure if I'm posting in the right section. So, sorry if this post is not in the right place.

1779806051130.webp1779806062522.webp1779806095576.webp1779806120087.webp1779806131161.webp
 
admin
Katılım
23 Eki 2022
Mesajlar
7,901
Çözümler
12
Tepkime puanı
4,630
Puanları
113
Yaş
28

❗ Problem:


  • Server local IP (192.168.x.x) ile çalışıyor
  • Client büyük ihtimal:
    • media.pk2 içinde farklı IP var
    • veya loopback (127.0.0.1) uyumsuz



🔥 %90 Sorun: IP Uyumsuzluğu


Kontrol etmen gerekenler:


1. vSRO Server Files → ini dosyaları


  • Certification
  • GatewayServer
  • AgentServer

Hepsinde IP aynı olmalı
 

Gabbar

ÜYE
Katılım
26 May 2026
Mesajlar
5
Tepkime puanı
1
Puanları
2
Yaş
28
Konum
Egypt

❗ Problem:

  • Server local IP (192.168.x works with
  • Client most likely:
    • there is a different IP in Media.pk2
    • or loopback (127.0.0.1) incompatible



🔥 90% Issue: IP Incompatibility

What you need to check:

1. vSRO Server Files → ini files

  • Certification
  • GatewayServer
  • AgentServer

IP in all it should be the same
How to check these files exactly?

Sorry but I'm completely new to this.
 
admin
Katılım
23 Eki 2022
Mesajlar
7,901
Çözümler
12
Tepkime puanı
4,630
Puanları
113
Yaş
28
Search for .ini files inside your server files folder and check the IP addresses inside them.


Make sure all IP addresses are the same and correctly configured (e.g., 127.0.0.1 or your local network IP like 192.168.x.x).


If the IPs are different or incorrect, the client won't be able to connect when you press Start.
 

Gabbar

ÜYE
Katılım
26 May 2026
Mesajlar
5
Tepkime puanı
1
Puanları
2
Yaş
28
Konum
Egypt
Search for .ini files inside your server files folder and check the IP addresses inside them.


Make sure all IP addresses are the same and correctly configured (eg, 127.0.0.1 or your local network IP like 192.168.xx).


If the IPs are different or incorrect, the client won't be able to connect when you press Start.


1779810856792.webp
 
Üst
Reklam Ver
R10dev.net'i ana ekrana ekle!

Access Restricted

Browser developer tools or unauthorized inspection detected.
Access to this site is limited to standard browser sessions for security reasons.

Protection by r10dev.net